Crochet 3D Rose Free Pattern

This crochet 3D rose pattern creates a dimensional flower from separate small, medium, and large petals, plus a sepal, three leaves, and a long stem. Choose yarn colors to suit a bouquet, home decoration, or handmade gift. The pattern is worked in rounds and includes assembly instructions; a stitch marker can help keep track of each round.

About This Crochet 3D Rose

The layered petals give the flower its three-dimensional shape, while wire in the leaves and stem helps the finished rose hold its form. The pattern calls for light purple and green yarn, but other colors can be used to match your project. For a fuller bouquet, make additional roses and arrange them together once assembled.

Each flower uses three large petals, three medium petals, and three small petals. Make three leaves as well. Read through the materials and abbreviations before starting, and check stitch counts at the end of each round where counts are provided.

Materials and Abbreviations

Gather the following supplies before you begin. Take care when using hot-melt adhesive, and allow it to cool before handling the joined pieces.

• Yarn in two colors: light purple and green
• Hook: 2/2.5 mm
• Flower rod: 40cm long x 2mm diameter (16 x .87 inches)
• Iron wire: 15 cm long x 0.4mm diameter (6 x 0.02 inches)
• Hot-melt adhesive
• Double-sided tape
• Stitch markers and scissors

Abbreviations: sc = single crochet; hdc = half double crochet; dc = double crochet; tr = treble stitch; ss = slip stitch; ch = chain; st = stitch. To crochet over the wire, insert the hook under the wire and work the stitch over it.

Crochet 3D Rose Pattern

Make the petal pieces in the order below. The instructions specify a slip stitch and chain at the end of many rounds; follow those directions as written. Place a marker in the first stitch of each round to make counting easier.

Large Rose Petals (Make 3)

• Make a magic ring.
• R1: 6sc into the magic ring, 1 ss, 1 ch. [6]
• R2: (2sc in next st) 6 times, 1 ss, 1 ch. [12]
• R3: (1 sc, 2sc in the next st) 6 times, 1 ss, 1 ch. [18]
• R4: (1 sc, 2sc in the next st, 1 sc) 6 times, 1 ss, 1 ch. [24]
• R5: (3 sc, 2sc in next st) 6 times, 1 ss, 1 ch. [30]
• R6: (2 sc, 2sc in next st, 2 sc) 6 times, 1 ss, 1 ch. [36]

• R7: sc10, 2sc in next st; (4 sc, 2sc in next st) 3 times; 10 sc. 1 ss, 1 ch. [40]
• R8: sc10, 2sc in next st; (sc5, 2sc in next st) 3 times; 11 sc. 1 ss, 1 ch. [44]
• R9: sc11, 2 sc in next st, (sc6, 2sc in next st) 3 times, 11sc, 1 ss, 1 ch. [48]
• R10: sc11, 2 sc in next st, (3sc, sc2 in next st) 6 times, 12 sc, 1 ss, 1 ch. [55]
• R11: sc12, 2sc in next st, sc4; (in the same st: 1 sc, 1 ch, 1 sc); sc4, 2sc in next st, sc4, (in the same st 1sc, 2ch, 1sc); sc4, 2sc in next st, sc4; (in the same st 1sc, 1ch, 1sc); sc4, 2sc in next st, sc12. 1ss.

After completing the first large petal, make two more, for three large petals in total.

Medium Rose Petals (Make 3)

• Make a magic ring.
• R1: 6sc into the magic ring, 1 ss, 1 ch. [6]
• R2: (2sc in next st) 6 times, 1 ss, 1 ch. [12]
• R3: (1 sc, 2sc in the next st) 6 times, 1 ss, 1 ch. [18]
• R4: (1 sc, 2sc in the next st, 1 sc) 6 times, 1 ss, 1 ch. [24]
• R5: (3 sc, 2sc in next st) 6 times, 1 ss, 1 ch. [30]
• R6: (2 sc, 2sc in next st, 2 sc) 6 times, 1 ss, 1 ch. [36]
• R7: sc10, 2sc in next st; (4 sc, 2sc in next st) 3 times; 10 sc. 1 ss, 1 ch. [40]
• R8: sc10, 2sc in next st; (sc5, 2sc in next st) 3 times; 11 sc. 1 ss, 1 ch. [44]
• R9: sc11, 2 sc in next st, (sc6, 2sc in next st) 3 times, 11sc, 1 ss, 1 ch. [48]
• R10: sc11, 2 sc in next st, 3 sc; (in the same st: 1sc, 1ch, 1sc); sc3, 2sc in next st, sc3; (in the same st: 1sc, 2ch, 1sc); sc3, 2sc in next st, sc3; (in the same st 1sc, 1ch, 1sc); sc3, 2sc in next st, sc12. 1ss, cut and leave a tail.

Make two additional medium petals so you have three in total. Leave a yarn tail for joining the pieces.

Small Rose Petals (Make 3)

• Make a magic ring.
• R1: 6sc into the magic ring, 1 ss, 1 ch. [6]
• R2: (2sc in next st) 6 times, 1 ss, 1 ch. [12]
• R3: (1 sc, 2sc in the next st) 6 times, 1 ss, 1 ch. [18]
• R4: (1 sc, 2sc in the next st, 1 sc) 6 times, 1 ss, 1 ch. [24]
• R5: (3 sc, 2sc in next st) 6 times, 1 ss, 1 ch. [30]
• R6: (2 sc, 2sc in next st, 2 sc) 6 times, 1 ss, 1 ch. [36]
• R7: sc10, 2sc in next st; (4 sc, 2sc in next st) 3 times; 10 sc. 1 ss, 1 ch. [40]
• R8: sc10, 2sc in next st; (sc5, 2sc in next st) 3 times; 11 sc. 1 ss, 1 ch. [44]
• R9: sc11, 2 sc in next st, (sc6, 2sc in next st) 3 times, 11sc, 1 ss, 1 ch. [48]

Make two more small petals to complete the set of three.

Rose Sepal

• Start with a magic ring.
• R1: sc6 in magic ring, 1 ss, 1ch. [6]
• R2: (2sc in next st) 6 times, 1 ss, 1ch. [12]
• R3: (1sc, 2sc in next st) 6 times, 1 ss, 1ch. [18]
• R4: work sc18 in the round, 1 ss. [18]

• R5: (ch13, start the 2nd st from hook: 1ss, sc2, hdc2, dc3, tr4, sk 2 sts, 1 ss in the 4th sts) 6 times.

Fasten off after completing the sepal.

Rose Leaves (Make 3)

• Begin with a foundation chain: Ch13.
• R1: sc in 2nd st from hook, sc10, 3 sc in last chain (working on the other side of ch) sc10, sc2 in next st, ss, ch1.

• R2: add wire, sc, hdc, dc, tr6, dc, hdc, sc, 3sc in last ch (working on the other side of ch) sc, hdc, dc, tr6, dc, hdc, sc2, ss, 1ch.
• R3: from the last st of hook, sc in all the sts, 1 ss, cut and leave tail for wrap.

How to Assemble the Crochet 3D Rose

Assemble the leaf spray first, then attach the flower parts to the stem. Arrange the petals before applying adhesive so you can check their placement and the shape of the bloom.

Assemble the Leaves

1. Wrap the yarn tail around the iron wire and tie it securely.
2. Repeat for the other two leaves.
3. Wrap all three leaves together around the iron wire with yarn.

Join the Flower and Stem

1. Insert the stem through the center of the small petals and bend the end of the stem.
2. Apply hot-melt adhesive to the petals and wrap them around the stem.
3. Add the small, medium, and large petals in order. Trim excess yarn tails.
4. Insert the stem through the center of the flower sepal. Apply hot-melt adhesive to the sepal and secure it to the flower.
5. Wrap green yarn around the flower stem.
6. Add the leaf spray and continue wrapping to the end of the stem. Trim the yarn tail and secure it with hot-melt adhesive.

Let the adhesive set fully before arranging or displaying the finished flower. You can make additional roses in coordinating colors to create a bouquet.

Pattern Notes and Helpful Tips

• The petals are worked in rounds.
• Do not ch1 at the beginning of the round.
• Place a stitch marker in the first stitch of each round to help keep count.
• When crocheting over wire, keep the wire positioned along the edge of the work and make each stitch around it.
• Handle the wire ends carefully, and use scissors and hot-melt adhesive with care.

This crochet 3D rose pattern combines separate crochet components into a flower with a stem and leaves. Follow the piece counts and assembly order, then choose colors that suit your intended bouquet or display.